This VAG-COM Tacho 2.5 USB to OBD-II interface cable is used for reading data from VW, Audi, Seat, Skoda and certain other car brands and models (see specifications below). This VAG-COM, VAT-ISO OBD II style cable is an aftermarket tool for transmission protocols with 16pin OBDII style data link connector that supports VDO SEED-KEY protected dashboards.

This car diagnostics USB to 16PIN OBD-II cable with software allows you to read/write EEPROM programming, read PIN codes for new key change and update the millage of your car. Use your computer and this USB enabled VAG-COM interface cable, and you will be able to instantly modify certain settings and clear errors in your vehicle. With easy installation of the software provided with this Tacho 2.5 USB OBD-II cable, you can start self-troubleshooting your very own car, and view results within minutes.

This model supports VDO SEED-KEY protected dashboards so you can read the Immobilizer PIN code of your car without the need to remove the dash panel. The VAG-COM Tacho 2.5 interface cable is easily connectible to your vehicle through the OBD diagnostics port. There is no doubt that this simple tool is very cost effective, whether you are a mechanic or just a car owner.

At a Glance...

• VAG-COM Tacho 2.5 USB to OBD-II Interface Cable
• Supports VDO SEED-KEY protected dashboards
• Full featured diagnostic code analyzing software

--------

Manufacturer Specifications

• Primary Function: USB Vag-Com interface cable
• OBDII Plug: J1962 16-Pin Male (to Car)
• USB Port enabled
• Operating Software Compatibility: Windows 98SE / ME / 2000 / NT and XP.
• Some Compatible Vehicle Models and Years:
  - Audi A4, A6, A8 with separate immobilizer box (1994-1999), reads PIN and reads/writes EEPROM
  - Audi A3, A4, A6, TT (1998-2002), reads PIN and corrects mileage
  - Audi (nearly all VDO dashboards) pre-2001 Reads/writes EEPROM
  - VW Beetle (New) Magneti Marelli M73 (1998-2002), reads PIN & corrects mileage
  - VW Beetle (New) Magneti Marelli M73 (2001-2005), reads PINs
  - VW, Seat, Skoda (nearly all VDO dashboards) pre-2004 reads/writes EEPROM
  - VW, Seat (nearly all MotoMeter dashboards) to 2001 reads/writes EEPROM
• Supports VDO SEED-KEY protected dashboards including the following VW's and Skodas:
  - Bora (to 2004)
  - Golf 4 (to 2003)
  - Jetta (to 2004)
  - Passat B6
  - Fabia (to 2004)
  - Skoda Octavia/Fabia (to 2004)
  - Also supports some Seat dashboards up to year 2004
• Dimension: L:125 (CM)
• Manufacturer Ref: D97F00F4FF9D

Product Notes

• No power supply needed, just connect to your car and computer
• IMPORTANT NOTE 1: We provide the package containing the CVFG-A08 cable and software. CNBuyNow provides no warranty or customer support regarding the software. We cannot give advice regarding the software or tell you if your model car is compatible with this particular cable package. If you have questions regarding the use of this product we suggest you search for internet forums related to car maintenance.
• IMPORTANT NOTE 2: The CVFG-A08 works on vehicles that's are VAG compliant. The best way check if your car is compliant with this type of cable is to check the car user manual, contact your car dealer or talk to your favorite mechanic.

Package Contents

• Model CVFG-A08 USB VAG-COM interface cable
• User CD Manual & Software - English

FAQ - Frequently Asked Questions

• I get a warning message from Windows when I am installing the software, should I be worried?
  No, the software should install and work just fine on most Windows computers.
• Do I need to have my car running while performing diagnostics?
  Just the ignition, but for some tests you might require the engine to be running.